MathJax is loading, please wait
$ \newcommand{\DiffmuE}{\mathcal{D}_{\mu,E}} \newcommand{\Diffmu}{\mathcal{D}_{\mu}} \newcommand{\id}{\text{id}} \newcommand{\Reeb}{E} \newcommand{\DiffmuF}{\mathcal{D}_{\mu,F}} \newcommand{\llangle}{\langle\!\langle} \newcommand{\rrangle}{\rangle\!\rangle} \DeclareMathOperator{\curl}{curl} \newcommand{\vvec}{\overrightarrow} $
Research ContributionArnold Mathematical Journal

Received: 3 February 2016 / Revised: 21 August 2016 / Accepted: 15 October 2016

The Geometry of Axisymmetric Ideal Fluid Flows with Swirl
Pearce Washabaugh University of Colorado Boulder CO USA and Stephen C. Preston Stephen.Preston@brooklyn.cuny.edu
Brooklyn College, Brooklyn NY USA and CUNY Graduate Center, New York NY USA
Abstract
The sectional curvature of the volume preserving diffeomorphism group of a Riemannian manifold $ M$ can give information about the stability of inviscid, incompressible fluid flows on $ M$. We demonstrate that the submanifold of the volumorphism group of the solid flat torus generated by axisymmetric fluid flows with swirl, denoted by $ \DiffmuE(M)$, has positive sectional curvature in every section containing the field $ X = u(r)\partial_\theta$ iff $ \partial_r(ru^2)>0$. This is in sharp contrast to the situation on $ \Diffmu(M)$, where only Killing fields $ X$ have nonnegative sectional curvature in all sections containing it. We also show that this criterion guarantees the existence of conjugate points on $ \DiffmuE(M)$ along the geodesic defined by $ X$.
Keywords
  Axisymmetric, Euler equation, Ideal fluid, Curvature,Euler-Arnold, Stability

1. Introduction

Let $ (M,g)$ be a Riemannian manifold of dimension at least two with Riemannian volume form $ \mu$. The configuration space for inviscid, incompressible fluid flows on $ M$ is the collection of smooth volume-preserving diffeomorphisms (volumorphisms) of $ M$, denoted by $ \mathcal{D}_\mu(M)$. [Arnold2014] showed in 1966 that flows obeying the Euler equations for inviscid, incompressible fluid flow can formally 1 be realized as geodesics on $ \mathcal{D}_\mu(M)$. Using this framework, questions of fluid mechanics can be re-phrased in terms of the Riemannian geometry of $ \Diffmu(M)$. An overview of this is given in [Arnold and Khesin1998] or more recently in [Khesin et al.2013]. Of particular interest is the sectional curvature of $ \Diffmu(M)$. As in finite dimensional geometry, given two geodesics with varying initial velocities in a region of strictly positive (resp. negative) sectional curvature, the two geodesics will converge (resp. diverge) via the Rauch Comparison theorem. In terms of fluid mechanics, this corresponds to the Lagrangian stability (resp. instability) of the associated fluid flows.

Arnold showed that the sectional curvature $ K(X,Y)$ of the plane in $ T_{\id}\Diffmu(M)$ spanned by $ X$ and $ Y$ is often negative but occasionally positive. [Rouchon1992] sharpened this to show that if $ M\subset \mathbb{R}^3$, then $ K(X,Y)\ge 0$ for every $ Y\in T_{\id}\Diffmu(M)$ if and only if $ X$ is a Killing field (i.e., one for which the flow generates a family of isometries). This result was generalized by [Misiołek1993] and the second author ([Preston2002]) for any manifold with $ \dim{M}\ge 2$. This gives the impression that, in general, $ D_\mu(M)$ will mostly be negatively curved. The question of when one can expect a divergence free vector field to give nonpositive sectional curvature remains open. However, the second author ([Preston2005]) provided criteria for divergence free vector fields of the form $ X = u(r)\partial_\theta$ on the area-preserving diffeomorphism groups of a rotationally-symmetric surface for which the sectional curvature $ K(X,Y)$ is nonpositive for all $ Y$.

Our goal in this paper is to extend the curvature computation to $ \DiffmuE(M)$, the group of volumorphisms commuting with the flow of a Killing field $ \Reeb$. In particular, we consider the solid flat torus, $ M= D^2\times S^1$, where $ D^2$ is the unit disk in $ \mathbb{R}^2$ and $ S^1$ is the unit circle, with cylindrical coordinates $ (r,\theta,z)$ for $ 0\le r\le 1$ and $ \theta,z\in [0,2\pi]$. We may think of this more concretely as the subset of $ \mathbb{R}^3$ with the planes $ z=0$ and $ z=2\pi$ identified, where $ E = \partial_\theta$ is the field corresponding to rotation in the disc. Fluid flows on this manifold correspond to axisymmetric ideal flows with swirl on the solid infinite cylinder, which are $ 2\pi$-periodic in the $ z$-direction. We consider steady fluid velocity fields of the form $ X = u(r)\partial_\theta$. The submanifold $ \DiffmuE(M)$ is a totally geodesic submanifold of $ \Diffmu(M)$ (see [Vizman1999], as well as [Haller et al.2002, Modin et al.2011] for the general situation in the smooth context, or see the preprint [Ebin and Preston2013] for the Sobolev diffeomorphism context), corresponding to the fact that an ideal fluid which is initially independent of $ \theta$ will always remain so. Hence we compute sectional curvatures $ K(X,Y)$ where $ Y\in T_{\id}\DiffmuE(M)$ is divergence-free and axisymmetric, i.e., $ [\Reeb,Y]=0$.

In [Preston2005] the second author effectively showed that when $ X$ was considered as an element of $ \DiffmuF(M)$ where $ F = \frac{\partial}{\partial z}$ (corresponding to considering $ X$ as a two-dimensional flow rather than a three-dimensional flow), the sectional curvature satisfied $ K(X,Y)\le 0$ for every $ Y\in T_{\id}\DiffmuF(M)$ regardless of $ u(r)$. By contrast we show here that if $ u$ satisfies the condition

\begin{equation}\label{positivecurvature} \frac{d}{dr}\big( ru(r)^2\big) > 0, \end{equation} (1)
then $ K(X,Y)> 0$ for every $ Y\in T_{\id}\DiffmuE(M)$. We will also show that $ \frac{d}{dr}\big( ru(r)^2\big) \geq 0$ implies that $ K(X,Y)\geq 0$. This does not contradict the result of Rouchon, since the proof of that result relies on being able to construct a divergence-free velocity field with small support which points in a given direction and is orthogonal to another direction, and there are not enough divergence-free vector fields in the axisymmetric case to accomplish this here.

The fact that the curvature is strictly positive in every section containing $ X$ makes it natural to ask whether there are conjugate points along every such corresponding geodesic. Unfortunately the Rauch comparison theorem cannot be used here, since $ \inf_{Y\in T_{\id}\DiffmuE(M)} K(X,Y) = 0$ even if (1) holds. Nonetheless we can show that as long as

\begin{equation}\label{conjugatepoints} ru(r)u'(r) + 2u(r)^2 > 0, \end{equation} (2)
the geodesic formed by $ X = u(r)\partial_{\theta}$ has infinitely many monoconjugate points. It is easy to see that condition (1) implies (2) . We do this by solving the Jacobi equation explicitly. As in [Ebin et al.2006], where the case $ u(r) \equiv 1$ was considered, we can prove that these monoconjugate points have an epiconjugate point as a limit point, so that the differential of the exponential map is not even weakly Fredholm.

2. The Formula for Curvature

We first compute the curvature of $ \DiffmuE(M)$ by expanding in a Fourier series in $ z$. Here all our vector fields and functions are smooth on the compact manifold $ M$, so that convergence of the series will never be an issue, as in the original computations of [Arnold2014]. If desired one could do the same computations in the Sobolev $ H^s$ context, with $ s>5/2$, and treat the curvature operator as a continuous linear operator in $ H^s$, as done by [Misiołek1993], but the final curvature formula is the same in either case. Our method here is similar to that of the second author in [Preston2005], where the computations were two-dimensional.

Notice first of all that any smooth vector field $ Y$ which is tangent to $ \DiffmuE(M)$ at the identity must be divergence-free and must commute with $ E=\frac{\partial}{\partial \theta}$. Therefore we can write in the form

\begin{equation}\label{Ytangent} Y(r,z) = -\frac{g_z(r,z)}{r} \, \partial_r + \frac{g_r(r,z)}{r} \, \partial_z + f(r,z) \, \partial_{\theta}, \end{equation} (3)
where $ f(0,z)=g(0,z) = 0$ and $ g(1,z)$ is constant in $ z$ (in order to be well-defined on the axis of symmetry and to have $ Y$ tangent to the boundary $ r=1$). We think of the term $ -\frac{g_z}{r} \partial_r + \frac{g_r}{r} \partial_z$ as an analogue of the skew-gradient in two dimensions. We may express $ Y$ in a Fourier series in $ z$ as $ Y(r,z) = \sum_{n\in\mathbb{Z}} Y_n(r,z)$ where

\begin{equation}\label{Ytangentfourier} Y_n(r,z) = e^{inz} \left[ -\frac{in}{r} g_n(r) \, \partial_r + \frac{g_n'(r)}{r} \, \partial_z + f_n(r) \, \partial_\theta\right]. \end{equation} (4)

On any Riemannian manifold $ (M,g)$ with volume form $ \mu$, a formula for the curvature tensor on $ \mathcal{D}_\mu(M)$ is given by

\begin{equation}\label{generalcurvature} R(Y,X)X=P\left(\nabla_YP(\nabla_XX)-\nabla_XP(\nabla_YX)+\nabla_{[X,Y]}X \right), \end{equation} (5)
where $ P(X)$ is the projection onto the divergence-free part of $ X$. Concretely, $ P(X)$ is obtained by solving the Neumann boundary value problem \begin{eqnarray*} \begin{cases} \Delta q = \mbox{div }X &\quad \mbox{ in } P(X)M\\ \left<\nabla q, \vvec{n}\right> = \left &\quad \mbox{ on } P(X)\partial M \end{cases} \end{eqnarray*} for $ q$ and then setting $ P(X) = X - \nabla q$. The non-normalized sectional curvature is then given by

\begin{equation}\label{nonnormalizeddef} \overline{K}(X,Y) = \llangle R(Y,X)X,\overline{Y}\rrangle = \int_M \left \mu. \end{equation} (6)
See [Misiołek1993] for the derivation of the formula we use here. Our goal now is to compute $ R(Y_n,X)X$, and to do this we first need to compute $ P(\nabla_{Y_n}X)$.
Lemma 1.
Suppose $ Y_n$ is of the form (4) and $ X = u(r)\,\partial_{\theta}$ in cylindrical coordinates on $ M$. Then the covariant derivative $ P(\nabla_{Y_n}X)$ in $ \DiffmuE(M)$ is given by $ P(\nabla_{Y_0}X) = 0$ and \begin{eqnarray*} P(\nabla_{Y_n}X) &=& \nabla_{Y_n}X - \nabla (q_ne^{inz}) = -( rf_nu + q_n') e^{inz}\partial_r\\ &&- \frac{in}{r}g_n\left(u'+\frac{u}{r} + r q_n\right)e^{inz}\partial_\theta\quad{\rm for} P(\nabla_{Y_0}X) = 0n\in\mathbb{N}, \end{eqnarray*} where

\begin{equation}\label{qnformula} q_n(r) = -\zeta_n(r) H_n(r) + \xi_n(r) J_n(r), \end{equation} (7)
with

\begin{equation}\label{HnJndef} H_n(r) = \int_0^r s^2 f_n(s) u(s) \xi_n'(s) \, ds \quad\text{and}\quad J_n(s) = -\int_r^1 s^2 f_n(s) u(s) \zeta_n'(s) \, ds, \end{equation} (8)
and \begin{eqnarray*} \xi_n(r) = I_0(nr) \quad {\rm and}\quad \zeta_n(r) = \tfrac{K_1(n)}{I_1(n)} I_0(nr) + K_0(nr), \end{eqnarray*} with $ I_0$ and $ K_0$ denoting the modified Bessel functions of the first and second kinds.

Proof.
Consider the cases $ n=0$ and $ n\in\mathbb{N}$ separately. For $ n=0$ we have \begin{eqnarray*} Y_0 = \tfrac{1}{r} \, g_0'(r) \partial_z + f_0(r)\partial_\theta \end{eqnarray*} and $ \nabla_{Y_0}X = -rf_0(r)u(r)\partial_r$.

This is also the gradient of a function, and thus $ P(\nabla_{Y_0}X) = 0.$

Now for $ n\neq 0$, \begin{eqnarray*} \nabla_{Y_n}X = -rf_nu e^{inz}\partial_r - \frac{in}{r}g_n\left(u'+\frac{u}{r}\right)e^{inz}\partial_\theta. \end{eqnarray*} The solution $ q_n(r)e^{inz}$ of

\begin{equation}\label{qnPDE} \begin{cases} \Delta (q_n(r) e^{inz}) = \mbox{div}(\nabla_{Y_n}X) &\quad\mbox{in }M, \\ \left.\left<\nabla (q_ne^{inz}),\vvec{n}\right> \right|_{\partial M}= \left.\left<\nabla_{Y_n}X,\vvec{n}\right>\right|_{\partial M}&\quad \mbox{on }\partial M, \end{cases} \end{equation} (9)
must satisfy the ordinary differential equation

\begin{equation}\label{qnODE} \begin{cases} \frac{1}{r}\,\frac{d}{dr}\left( r\,\frac{dq_n}{dr}\right) - n^2 q_n(r) = -\frac{1}{r}\,\frac{d}{dr} \big( r^2 f_n(r) u(r)\big)\quad \text{ for }0 (10)
The left side of this equation is a standard Bessel differential operator, and so the solution formula (7) is essentially just the variation of parameters formula together with an integration by parts since $ I_0$ and $ K_0$ solve the corresponding homogeneous equation. Here we can simply verify the solution: taking the derivative of $ q_n(r)$, we obtain

\begin{equation}\label{qnprime} \begin{array}{ll} q_n'(r) &= -\zeta_n'(r) H_n(r) + \xi_n'(r) J_n(r) + r^2 f_n(r)u(r) \big( \xi_n(r)\zeta_n'(r) - \zeta_n(r) \xi_n'(r)\big) \\ &= -\zeta_n'(r) H_n(r) + \xi_n'(r) J_n(r) - r f_n(r) u(r), \end{array} \end{equation} (11)
and since $ \zeta_n'(1)=J_n(1)=0$ we get the correct boundary condition. Furthermore we get \begin{eqnarray*} q_n''(r) = -\zeta_n''(r) H_n(r) + \xi_n''(r) J_n(r) - \frac{d}{dr} \big( r f_n(r) u(r)\big), \end{eqnarray*} and with these formulas we easily check that $ q_n$ satisfies (10) . ⬜

The projection $ P(\nabla_YX)$ is the most complicated part of the curvature formula (5) since $ P(\nabla_XX)=0$ for steady flows $ X$. Hence Lemma 1 easily gives the following expression for the curvature tensor.

Proposition 2.
Let $ M = D^2\times S^1$. Suppose that $ X\in T_{\id}\DiffmuE(M)$ is defined by $ X = u(r)\partial_\theta$, and let $ Y_n$ be of the form (4) . Then the curvature tensor $ R(Y_n,X)X$ is given for $ n\ne 0$ by

\begin{equation}\label{curvaturecomponent} R(Y_n,X)X = P \left( -inug_n\left(2u'+\frac{u}{r}\right)e^{inz}\partial_r+ \frac{(q_n'+rf_nu)ue^{inz}}{r}\partial_\theta \right), \end{equation} (12)
where $ q_n$ is the solution of the ODE (10) . For $ n=0$ we get $ R(Y_0,X)X=0$.

Proof.
We compute using formula (5) . First note that $ \nabla_X X = -ru^2\partial_r$, which is the gradient of a function. Thus $ P(\nabla_X X ) = 0$.

With the formula for the projection $ P(\nabla_{Y_n}X)$ from Lemma 1 in hand, we will get \begin{eqnarray*} \nabla_X(P(\nabla_{Y_n}X)) = inug_n\left(u'+\frac{u}{r}\right)e^{inz} \partial_r- \frac{(q_n'+rf_nu)ue^{inz}}{r}\,\partial_\theta \end{eqnarray*} for any nonzero integer $ n$. We also easily compute \begin{eqnarray*} \nabla_{[X,Y_n]}X = -in g_n(r)u(r)u'(r)e^{inz} \, \partial_r. \end{eqnarray*}

So, $ R$ will be given by (12) . ⬜

The sectional curvature can now be computed explicitly using Lemma 1 and Proposition 2; the formula simplifies substantially due to Bessel function identities.

Theorem 3.
On $ M=D^2\times S^1$ with $ X = u(r) \, \partial_{\theta}$ and $ Y$ expressed as in (3) , the non-normalized sectional curvature is given by $ \overline{K}(X,Y) = \sum_{n\in \mathbb{Z}} \overline{K}(X,Y_n)$, where $ Y_n$ is expressed as in (4) and

\begin{equation}\label{finalcurvatureformula} \overline{K}(X,Y_n) = 4\pi^2 \int_0^1 \frac{1}{r} \left( n^2 \, \lvert g_n(r)\rvert^2 \, \frac{d}{dr} \big( ru(r)^2\big) + \frac{\lvert H_n(r)\rvert^2}{I_1(nr)^2}\right) \, dr. \end{equation} (13)
Hence the curvature is positive for all $ Y$ if and only if $ \frac{d}{dr} \big(r u(r)^2\big) > 0$.

Proof.
Using formula (11) in (12) , we obtain \begin{eqnarray*} R(Y_n,X)X= P\left[\left(-inug_n\left(2u'+\frac{u}{r}\right)e^{inz}\right)\partial_r+ \frac{u(\xi_n'J_n- \zeta_n'H_n)e^{inz}}{r}\partial_\theta\right], \end{eqnarray*} which can clearly be expressed as $ e^{inz}$ times a function of $ r$ only. Orthogonality of the functions $ e^{imz}$ and $ e^{inz}$ over $ S^1$ when $ m\ne n$ implies that \begin{eqnarray*} \overline{K}(X,Y) = \sum_{m,n\in\mathbb{Z}} \llangle Y_m, R(Y_n, X)X\rrangle = \sum_{n\in\mathbb{Z}} \llangle \overline{Y_n}, R(Y_n, X)X\rrangle = \sum_{n\in\mathbb{Z}} \overline{K}(X,Y_n). \end{eqnarray*}

The latter is now relatively easy to compute. We have

\begin{eqnarray}\label{curvaturefourier} \overline{K}(X,Y_n) &=& 4\pi^2 \int_0^1 \frac{n^2}{r^2} \lvert g_n(r)\rvert^2\, \eta(r) \, dr + 4\pi^2\nonumber\\ &&\times\,\int_0^1 r^2\overline{f_n(r)} \Big( u(r)\big( \xi_n'(r)J_n(r) - \zeta'(r)H_n(r)\big)\Big) \,dr, \end{eqnarray} (14)
where $ \eta(r) = \frac{d}{dr} \big( ru(r)^2\big)$. By the definitions (8) of $ H_n$ and $ J_n$, we see that the second term in (14) is \begin{eqnarray*} 4\pi^2 \int_0^1 \big(\overline{H_n'(r)} J_n(r) - \overline{J_n'(r)} H_n(r)\big)\,dr. \end{eqnarray*}

From here we adapt the corresponding computation in [Preston2006]. Integrating by parts and using the fact that $ J_n(r)\overline{H_n}(r)\to 0$ as $ r\to 0$ or $ r\to 1$, we get

\begin{eqnarray*} \int_0^1\overline{H_n'(r)}J_n(r)-\overline{J_n'(r)}H_n(r)\,dr &=& -2\mbox{Re}\int_0^1\overline{J_n'(r)}H_n(r)\,dr\\ &=&\int_0^1\frac{J_n'(r)}{H_n'(r)} \frac{d}{dr}\left(\left|H_n(r)\right|^2\right)\,dr, \end{eqnarray*} and another integration by parts (where again the boundary terms vanish) gives \begin{eqnarray*} \int_0^1\overline{H_n'(r)}J_n(r)-\overline{J_n'(r)}H_n(r)\,dr = -\int_0^1\frac{d}{dr}\left(\frac{K_1(nr)}{I_1(nr)}\right) \lvert H_n(r)\rvert^2 \, dr. \end{eqnarray*} Finally the Bessel function identity $ \frac{d}{dr} \left( \frac{K_1(r)}{I_1(r)}\right) = \frac{1}{r I_1(r)^2}$ implies (13) . ⬜

Remark 4.
The normalized sectional curvature is given by $ K(X,Y) = { } \frac{\overline{K}}{\llangle X,X\rrangle \llangle Y,Y\rrangle - \llangle X,Y\rrangle^2}$. Suppose that $ f=0$ and that only one $ g_n$ is nonzero in (4) ; then we have $ \llangle X,Y\rrangle = 0$ and the sectional curvature takes the form \begin{eqnarray*} K(X,Y) = \frac{n^2 \int_0^1 \frac{1}{r} \, \lvert g_n(r)\rvert^2 \, \frac{d}{dr} \big( ru(r)^2\big) \, dr}{\left(\int_0^1 r^3u(r)^2\,dr\right) \left( \int_0^1 \big(\frac{n^2}{r} \lvert g_n(r)\rvert^2 + \lvert g_n'(r)\rvert^2 \big) \, dr\right)}. \end{eqnarray*} We can make this arbitrarily small by choosing a highly oscillatory $ g_n$. Hence although the curvature is strictly positive if $ \frac{d}{dr} \big(ru(r)^2\big) > 0$, it cannot be bounded below by any positive constant.

3. Solution of the Jacobi Equation

It is natural to ask whether the positive curvature guaranteed by the theorem above ensures the existence of conjugate points along the corresponding geodesic. This is not automatic since although the sectional curvature is positive in all sections containing the geodesic's tangent vector, it is not bounded below by any positive constant because of Remark 4; hence the Rauch comparison theorem cannot be applied directly (and in any case would need to be proved in the present formal context of weak metrics on Fr[U+00B4]echet manifolds). In this section we answer this question affirmatively by solving the Jacobi equation more or less explicitly along such a geodesic, and show that in fact conjugate points occur rather frequently.

Theorem 5.
Let $ \eta(t)$ be a geodesic on $ \DiffmuE(D^2\times S^1)$ with initial condition $ \eta(0)=\mbox{id}$ and $ \dot{\eta}(0) = X = u(r)\partial_\theta$. Let $ \omega(r) = 2u(r) + ru'(r)$ denote the vorticity function of $ X$, and assume that $ u(r)\omega(r)>0$ for all $ r\in [0,9]$. Then $ \eta(t)$ is a monoconjugate point to $ \eta(0)$ for every time $ t = 2 \pi \lambda/n$, where $ n\in\mathbb{N}$ is arbitrary and $ \lambda$ is any eigenvalue of the Bessel-type Sturm-Liouville problem \begin{eqnarray*} \frac{1}{r} \, \frac{d}{dr}\big( r\psi'(r)\big) - \Big( n^2 + \frac{1}{r^2}\Big) \psi(r) = -2 \lambda^2 u(r) \omega(r) \psi(r), \quad \psi(1)=0, \quad\psi(0) \text{ finite}. \end{eqnarray*}

Proof.
Along a geodesic $ \eta(t)$ with (steady) Eulerian velocity field $ X$, the Jacobi equation for a Jacobi field $ J(t) = Y(t)\circ\eta(t)$ may be written ([Preston2002]) as the system

\begin{align}\label{linearizedflow} \frac{\partial Y}{\partial t} + [X,Y(t)] = Z(t) \end{align} (15)

\begin{align}\label{linearizedeuler} \frac{\partial Z}{\partial t} + P(\nabla_XZ(t) + \nabla_{Z(t)}X) = 0, \end{align} (16)
where $ P$ is the orthogonal projection onto divergence-free vector fields. The first equation is the linearized flow equation, while the second is the linearized Euler equation used in stability analysis.

Write \begin{eqnarray*} Z(t,r,z) = -\frac{1}{r} \, \frac{\partial h}{\partial z}(t,r,z) \, \partial_r + \frac{1}{r} \, \frac{\partial h}{\partial r}(t,r,z)\,\partial_z + j(t,r,z) \, \partial_\theta, \end{eqnarray*} where $ h=0$ on the axis $ r=0$ and $ h$ is constant on the boundary $ r=1$. Then it is easy to compute that (16) becomes the system

\begin{align}\label{jeq} \frac{\partial j}{\partial t}(t,r,z) &= \frac{\omega(r)}{r^2} \, \frac{\partial h}{\partial z}(t,r,z), \end{align} (17)

\begin{align} -\frac{1}{r} \, \frac{\partial^2 h}{\partial t\partial z}(t,r,z) \, \partial_r + \frac{1}{r} \, \frac{\partial^2 h}{\partial t\partial r}(t,r,z) \, \partial_z &= 2 P\left( r u(r) j(t,r,z) \, \partial_r\right), \label{heq} \end{align} (18)
where $ \omega(r) = 2u(r) + r u'(r)$ is the vorticity defined by $ \curl X = \omega(r) \, \partial_z$. Applying the curl to both sides of Eq. (18) to eliminate the projection operator, we obtain

\begin{equation}\label{hlaplacian} \frac{\partial}{\partial t} \left[ \frac{\partial}{\partial r}\left( \frac{1}{r} \, \frac{\partial h}{\partial r}\right) + \frac{1}{r} \, \frac{\partial^2h}{\partial z^2} \right] = -2r u(r) \, \frac{\partial j}{\partial z}. \end{equation} (19)

Differentiating (19) in time and substituting (17) we obtain the single equation

\begin{equation}\label{hsingle} \frac{\partial^2}{\partial t^2}\left[ \frac{\partial}{\partial r}\left( \frac{1}{r} \, \frac{\partial h}{\partial r}\right) + \frac{1}{r} \, \frac{\partial^2 h}{\partial z^2}\right] = -\frac{2u(r) \omega(r)}{r}\, \frac{\partial^2 h}{\partial z^2}. \end{equation} (20)
Expand $ h$ in a Fourier series in $ z$ to get \begin{eqnarray*} h(t,r,z) = \sum_{n\in \mathbb{Z}} h_n(t,r) e^{inz}. \end{eqnarray*} Then for each $ n$ we can solve the eigenvalue problem \begin{eqnarray*} \frac{d}{dr} \left( \frac{1}{r} \, \phi'(r)\right) - \frac{n^2}{r} \, \phi(r) = \frac{2C u(r) \omega(r)}{r} \, \phi(r); \end{eqnarray*} to make this look more familiar we set $ \phi(r) = r \psi(r)$ and obtain \begin{eqnarray*} \frac{1}{r} \frac{d}{dr} \left( r \psi'(r)\right) - \left( n^2 + \frac{1}{r^2}\right) \psi(r) = 2C u(r) \omega(r) \psi(r), \end{eqnarray*} which is a singular Sturm--Liouville problem analogous to the Bessel equation. We obtain a sequence of eigenfunctions $ \phi_{mn}(r)$ for $ m\in \mathbb{N}$, with eigenvalues $ C_{mn}$. We see that \begin{eqnarray*} 2 C \int_0^1 \frac{u(r) \omega(r)}{r}\, \phi(r)^2 \, dr = -\int_0^1 \frac{1}{r} \, \phi'(r)^2 \, dr - \int_0^1 \frac{n^2}{r} \, \phi(r)^2 \, dr, \end{eqnarray*} so that if $ \omega(r)u(r)>0$, then $ C$ must be strictly negative; we write $ C = -\lambda_{mn}^2$ for the eigenfunction $ \phi_{mn}(r)$. Expanding $ h_n(t,r)$ in a basis of such eigenfunctions as \begin{eqnarray*} h(t,r,z) = \sum_{n\in\mathbb{Z}} \sum_{m=1}^{\infty} h_{mn}(t) \phi_{mn}(r) e^{inz}, \end{eqnarray*} Equation (20) becomes \begin{eqnarray*} -\lambda_{mn}^2 h_{mn}''(t) = n^2 h_{mn}(t), \end{eqnarray*} which obviously has solutions \begin{eqnarray*} h_{mn}(t) = a_{mn} \cos{\left( \frac{nt}{\lambda_{mn}}\right)} + b_{mn} \sin{\left( \frac{n t}{\lambda_{mn}}\right)} \end{eqnarray*} for some coefficients $ a_{mn}$ and $ b_{mn}$.

Suppose $ a_{m,n}=a_{m,-n}=\tfrac{1}{2}$ for some $ (m,n)$ with $ n\ne 0$, and that all other $ a$ are zero and that every $ b$ is zero, so that $ h(t,r,z) = \cos{\left( \frac{nt}{\lambda_{mn}}\right)} \phi_{mn}(r) \cos{nz}$. Then by Eq. (19) we compute that \begin{eqnarray*} j(t,r,z) = -\frac{\lambda_{mn} \omega(r)}{r^2} \, \phi_{mn}(r) \sin{nz} \sin{\left( \frac{nt}{\lambda_{mn}}\right)}. \end{eqnarray*}

To find the Jacobi fields, write $ Y$ in Eq. (15) as \begin{eqnarray*} Y(t,r,z) = -\frac{1}{r} \, \frac{\partial g}{\partial z}(t,r,z) \, \partial_r + \frac{1}{r} \, \frac{\partial g}{\partial r}(t,r,z) \, \partial_z + f(t,r,z) \, \partial_\theta. \end{eqnarray*} We easily compute that $ X = u(r) \, \frac{\partial}{\partial \theta}$ gives $ [X,Y] = \frac{1}{r} \frac{\partial g}{\partial z} u'(r) \, \frac{\partial}{\partial\theta}$, and thus Eq. (15) becomes in components \begin{align*} \frac{\partial g}{\partial t}(t,r,z) &= h(t,r,z) \\ \frac{\partial f}{\partial t}(t,r,z) + \frac{u'(r)}{r} \, \frac{\partial g}{\partial z}(t,r,z) &= j(t,r,z). \end{align*} With $ g(0,r,z)=f(0,r,z)=0$, we find that \begin{align*} g(t,r,z) &= \frac{\lambda_{mn}}{n} \, \cos{nz} \sin{\left( \frac{nt}{\lambda_{mn}}\right)} \phi_{mn}(r) \\ f(t,r,z) &= \frac{2\lambda_{mn}^2u(r)}{nr^2}\, \sin{nz} \left( \cos{\left( \frac{nt}{\lambda_{mn}}\right)} - 1\right) \phi_{mn}(r). \end{align*} Thus both $ f$ and $ g$ vanish when $ t=0$ and when $ t = 2 \pi \lambda_{mn}/n$, so $ \eta(2\pi\lambda_{mn}/n)$ is monoconjugate to the identity along $ \eta$. ⬜

Remark 6.
Using the Sturm comparison theorem we can estimate the spacing of the eigenvalues $ \lambda_{mn}$ and show that for fixed $ m$ the sequence $ \lambda_{mn}/n$ has a finite limit as $ n\to\infty$. Just as in [Ebin et al.2006], this must be an epiconjugate point. Therefore the differential of the exponential map is not even weakly Fredholm along any geodesic of this form (which is to say the differential of the exponential map, extended to a linear map in the weak Riemannian $ L^2$ topology, is not a Fredholm operator). It is worth noting that the reason the Jacobi equation is explicitly solvable in this case is because there is no "drift" term, so the total time derivative agrees with the partial time derivative, in the same way as in [Ebin et al.2006].

It would be very interesting to generalize the curvature computation to fields of the form $ X = u(r) \sin{z} \, \partial_{\theta}$, which is the initial velocity field of the Luo-Hou initial condition ([Luo and Hou2014]) that leads numerically to a blowup solution. We expect that the formula $ \int \overline{H_n'}J_n - \overline{J_n'}H_n$ which appears both here and in [Preston2005] is a typical feature of curvature formulas when computed correctly, although they doubtless become substantially more complicated.

Acknowledgements.
The second author gratefully acknowledges support from NSF Grants DMS-1157293 and DMS-1105660.

References

[Arnold2014] Arnold, V.I.: On the differential geometry of infinite-dimensional Lie groups and its application to the hydrodynamics of perfect fluids. In: Arnold, V.I. (ed.) Collected works vol. 2. Springer, New York (2014)
[Arnold and Khesin1998] Arnold, V.I., Khesin, B.: Topological methods in hydrodynamics. Springer, New York (1998)
[Ebin and Marsden1970] Ebin, D.G., Marsden, J.: Diffeomorphism groups and the motion of an incompressible fluid. Ann. Math. 92 (1970)
[Ebin et al.2006] Ebin, D.G., Misiołek, G., Preston, S.C.: Singularities of the exponential map on the volume-preserving diffeomorphism group. Geom. Funct. Anal. 16 , 850--868 (2006)
[Ebin and Preston2013] Ebin, D.G., Preston, S.C.: Riemannian geometry of the quantomorphism group (2013). arXiv:1302.5075
[Haller et al.2002] Haller, S., Teichmann, J., Vizman, C.: Totally geodesic subgroups of diffeomorphisms. J. Geom. Phys. 42 , 342--354 (2002)
[Khesin et al.2013] Khesin, B., Lenells, J., Misiołek, G., Preston, S.C.: Curvatures of Sobolev metrics on diffeomorphism groups. Pure Appl. Math. Q. 9 , 342--354 (2013)
[Luo and Hou2014] Luo, G., Hou, T.Y.: Toward the finite-time blowup of the 3D axisymmetric Euler equations: a numerical investigation. Multiscale Model. Simul. 12 , 1722--1776 (2014)
[Misiołek1993] Misiołek, G.: Stability of ideal fluids and the geometry of the group of diffeomorphisms. Indiana Univ. Math. J. 42 , 215--235 (1993)
[Modin et al.2011] Modin, K., Perlmutter, M., Marsland, S., McLachlan, R.: On Euler-Arnold equations and totally geodesic subgroups. J. Geom. Phys. 61 , 1446--1461 (2011)
[Preston2002] Preston, S.C.: Eulerian and Lagrangian stability of fluid motions, Ph. D. Thesis, SUNY Stony Brook (2002)
[Preston2005] Preston, S.C.: Nonpositive curvature on the area-preserving diffeomorphism group. J. Geom. Phys. 53 , 226--248 (2005)
[Preston2006] Preston, S.C.: On the volumorphism group, the first conjugate point is always the hardest. Commun. Math. Phys. 267 , 493--513 (2006)
[Rouchon1992] Rouchon, P.: Jacobi equation, Riemannian curvature and the motion of a perfect incompressible fluid. European J. Mech. B Fluids 11 , 317--336 (1992)
[Vizman1999] Vizman, C.: Curvature and geodesics on diffeomorphism groups. Proceedings of the Fourth International Workshop on Differential Geometry. Bra[U+00B8]sov, Romania (1999)